Selecting the Right Home Air Conditioning System For You

Shopping for an ac system can be an overbearing process for the homeowner with all the types and options available. To be able to maintain your sanity (and your money), it is helpful to have some tips at your disposal in order to narrow down the options to only those that meet your requirements. Here are some tips to help you determine the best options for you in your particular circumstance. I will list then by least expensive to most expensive.

Portable Air Conditioners

Portable air conditioners are a great utility appliance to have in any house. They are ideal for providing spot cooling for areas or smaller rooms in an’as needed’ basis. So you will require access to a window or some other portal to make this happen you will have to channel the heat to the exterior via the exhaust duct supplied with the device. HoggMechanical Condensation is also gathered inside of the device and needs to be emptied after each use or when it matches up. You should view them as a appliance like your vacuum cleaner which will be pulled out when required and put away when not in use when contemplating air conditioners. Then that is not the optimal solution for your program, if you imagine yourself using this appliance on a constant basis in a place. Here are some features That You Ought to consider Should You decide to move forward with the option:

Get the highest BTU rating which you can afford.

Find a unit using an automatic shut-off when the condensation reservoir fills up.

Look for components which come equipped with a washable air filter. This will cut down on your maintenance costs.

Other choices like timers, oscillators, wheels, etc. are a matter of personal preference and budget.

Window Mounted Air Conditioners

Window components are a fantastic solution for heating individual rooms inside your home and therefore are utilized as the principal cooling system in most of the northern US where high temperatures are limited to approximately three months out of this year. The homeowner can installs window components with no aide of an ac professional. It’s rare to find, although they are not intended to be permanent fixtures. The drawback to the window is they create a great deal of sound, both inside and outside. Should you need to cool more than one room you will need extra components. Listed below are a few considerations if you are Looking for window components:

Highest BTU rating that you could spend.

A sturdy window/window framework to support the weight of this device.

Condensation drips from the back of the unit. Make certain it isn’t going to land someplace that will lead to a possible health hazard for children and pets.

You will require a 3-prong socket within close proximity of your window to provide power to the unit.

Is the filter accessible from the front of the unit? This is especially important for story applications. www.hoggmechanical.com/locations/kitchener/

Mini-Split -orDuctless Air Conditioners

This really is a 2-piece cooling system that does about the same job as window components but doesn’t call for a window and is very quiet. A hole is punched in the exterior wall of your house to provide air. The fan unit is connected by copper tubing to the condenser that is set up on a slab outside of your property. Ductless systems that I’ve installed are the end result of that the noise was not acceptable, or not having a window available where the cooling was required. If this sounds like you, then here are some things you should consider before selecting the unit:

The device should be sized with an expert based on the square footage of the area to be cooled in addition to the climate. Factors like orientation and shading of the exterior walls play into the calculation.

Look for a washable air filter to reduce your maintenance cost.

R-22 Freon has been phased out, so only think about a PURON-based solution. Split System Central Air Conditioners Split system central air conditioning is the alternative from the US or in locations. There are 3 components to a split system solution: The compressor that is mounted onto a slab outside of the condenser your home and the blower/heater which are installed in-line with your ductwork in your attic area. The rooms in your house and the blower’s ductwork services all doubles as a heater to the winter seasons that are short. The air is recirculated within your house and filtered via a return . If your home was not designed to encourage a central heating and air conditioning solution, then trying to retrofit into your home can be very pricey. guelph air conditioning Routing the ductwork can be tricky if not impossible in some cases for houses not originally designed to permit for it. Then you should consider the following if you are currently considering a new heating and Ac solution:

Do not use the size of your old unit to determine the size required for a replacement unit. The majority of systems are. Installing will result in higher energy consumption and condensation elimination. Have a professional dimension your system predicated on Manual”J” criteria. If your air conditioning professional does not understand what this is, then run away quickly (-;

Consider replacing your ducts at precisely the same moment. Ductwork includes mold and other health dangers. New ductwork will offer you efficiency and a healthier living environment.

Consider only Puron-based systems because freon (R22) coolant has been phased out.

Weigh the cost of systems using a SEER rating of 16 or greater against those with a lower SEER score to ascertain that the Energy Tax Credit provided by the EPA will work for you.

If you have health issues, then you may want to check into electronic air cleaners and UV lights as additional low-cost accessories which may be installed in-line for cleaner air.

Package System Air Conditioners

A package system is a single unit solution which has all the components which are observed in a split platform alternative inside a single unit. There are most bundle system in workplace buildings. There are a few home software in mostly homes where the units are hidden in the plain sight so as not to disrupt the landscaping. Another major difference between a bundle system versus a split system is warmth exhaust is pumped outside and that air is channeled in from the outside. As a result of this, package solutions are less energy efficient than divide systems.

You have the same concerns when looking at a package solution as you do with a broken system. The distinction is the SEER rating requirement is 14 instead of 16.

Hopefully, we’ve given you some information that will help narrow down the apparently infinite options which are available for your air conditioning needs.